In the previous essay of this series I showed and explained how my family taps sugar maple trees to collect sap for making maple syrup. Now I’m going to explain how we collect the sap and store it.
It takes approximately 40 gallons of sugar maple tree sap to make a gallon of finished maple syrup. The exact amount varies because sugar content of sap varies. It varies between different trees, and even within the same tree throughout the season.
Our “sugar bush” is right out the back door of our house, just across the lawn. With only 25 taps to collect, we simply walk from tree to tree with a couple of five-gallon plastic pails. We unhook the galvanized sap pail from the hook on the sap spile (see previous essay for details) and dump the contents into our collecting buckets. Here’s a picture of me doing just that.
And here’s a picture of my son, Robert, filling a pail.
As you can see, collecting sap is a simple process. But that isn’t to say it is easy. Sap weighs around 8 pounds a gallon. The buckets are heavy to carry. The difficulty of the task is compounded by the steep terrain we have to traverse. Keep in mind too that maple season is also mud and ice season. So collecting sap in buckets and carrying them uphill to our collecting tank is a real workout.
There are days throughout the maple season when the sap doesn’t flow at all, and there are days when it really “runs” (which isn’t to say it is actually running out of the tree like a faucet—it’s just dripping fast and a lot of sap accumulates in the pails). On a good day we will collect sap a couple of times. But usually we collect once in the late afternoon. Here is a picture of me carrying some full buckets.
We carry the buckets of sap out of the woods to our makeshift “sugar shack” which is right next to our house, in our wood shed. Before I show you the wood shed and the west side of my house, I need to warn you—this is not a pretty picture. The west side of our house has no siding beyond weathered plywood and some tarpaper. When you are a one-income family and you build your house on a budget, without borrowing money, things like siding can wait....and wait. That’s part of My Christian Agrarian Reality. Here’s the picture:
What you’re looking at is a “temporary” wood shed that has been in place for eight years—far longer than I originally intended. I built it cheap with lumberyard culls and salvaged barn roofing. It does the job. We hand wood through the window in the background and put it in my Yeoman Furniture Wood Box. By the way, CLICK HERE to see the remarkable contrast between the above west side of my house, and the east side.
Underneath the woodshed is a steaming evaporator, which I’ll discuss in more detail in the next essay of this series. For now, I’d like to draw your attention to the big white 55-gallon plastic barrel. That is our sap collection tank. Here is another view:
The 55-gallon barrel is up off the ground so we can gravity-feed sap down into the evaporator. Please note that the barrel is up on top of a homemade Whizbang Garden Cart (an essential homestead tool if there ever was one).
You will also notice in the picture that our collecting buckets are upended over upright poles. That is how we store them to keep them off the ground and clean until the next time we need them.
We fill the barrel by dumping buckets of sap into the top, as shown in this next picture.
We don’t use any electric pumps to get the sap up into the barrel. Man and boy power does the job.
You can see a cloth is over the top of the barrel. That is a piece of sheer nylon curtain material that Marlene bought at a garage sale. It makes a very strong and effective filter and has multiple uses around the homestead. A filter is needed to separate bits of bark and bugs and such from the sap. Here’s another view showing the makeshift filter:
The filter is held in place with clothespins. After dumping our collected sap in the top, I take the clothespins and fabric off and put the lid on. I then clip the material to the roof of the wood shed and let is air dry until next time. In addition to filtering out bugs and bark, the filter will separate any slushy ice that was collected...
When sap partially freezes, the ice has almost no sugar content. So the ice is thrown away and the remaining sap has a higher concentration of sugar. A little icing is good because it results in less boiling time. Ice can form in the holding tank too, as seen in this next picture.
When the barrel ices up like that, it clogs the outlet drain in the bottom, and we have to dip the sap out of the top to get the boil started. As the evaporator heats up, it will thaw the bottom drain. Icing in the barrel makes more work, but I don’t mind because all that ice is water that doesn’t have to be boiled away. When the barrel is empty, I just tip it upside down and knock out the ice.
This next picture shows the water valve that I put on the bottom of the sap barrel.
We store sap until we get most of a barrel. If the weather is cold, the sap will keep for several days. In warmer weather it can go bad after a couple days. It is best to keep the collection tank out of the sun so the sap keeps a well as possible.
That’s the story on collecting maple sap.
In my next essay I will discuss our evaporator and how we boil the maple sap down into syrup.
Click here to go on to Backyard Sugarin' Part 4: Boiling Sap
CLICK HERE to go back to Part 1 of this Backyard Sugarin' series.
We're Off To A Good Start - Several Days ago I showed you the pictures of the first corn planting, 6 rows of an heirloom corn called *Golden Bantam*. My second planting of corn is...
4 hours ago